Sabot Starter Kit

Sabot Starter Kit

          Sabot Starter Kit
Click to enlarge image(s)

    Starter Kit includes 

100 Sabots, The Sabot    Seating die, and Free     Printable reloading data.


The More You Order

The More You Save!

.308  Winchester

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capacity  may vary 5-10% between brands.

Cartridge Type - .308 Winchester

Bullet Type - .22/sabot 

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 2.5

Case Length (IN) - 2.005

Full Case Capacity (GR WATER) - 56

Bullet Length (IN) - .72

Barrel Length (IN) - 22

Bullet Seating Depth (IN) - .225

Displaced Water (GR) - 4.231

Effective Water Capacity of Case (GR) - 51.796

Effective Barrel Length (IN) - 20.22

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data - .308 Winchester

Caliber - .308

Bullet Weight - 55 GR

Barrel Length - 20.22

Case Capacity - 51.769 GR of  Water (CALC)

Bullet Dianeter - .308 in

Sectional Density - .083

Volume Ratio - 8.2

Cartridge Temperature - 70 Degrees F.

Powder Class - FAST POWDERS

 Powder type - IMR-4198/RX7/S-4197/IMR-3031 H322 *Check Manual*

Charge/ Bullet Weight - 0.753

Calc. Powder Charge  - 41.4GR

Load Den - 79.9%

Est. Muzzle Velocity - 3800 FT/SEC

Est. Peak Pressure - 38900 PSI

Powder Class - Alternate powder selection not available.

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data - .308 Winchester

Powder type - IMR-4198/RX7/S-4197/IMR-3031 H322 *Check Manual*

Load Density                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        38.8                            3600                    34200

       80                                        41.1                            3800                    38900

       85                                        44.0                            4000                    43900

       90                                        46.6                            4300                    49300*

       95                                        49.2                            4500                    45900*

     100                                        51.8                            4800                    60900*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved