Sabot Starter Kit

Sabot Starter Kit

          Sabot Starter Kit
Click to enlarge image(s)

    Starter Kit includes 

100 Sabots, The Sabot    Seating die, and Free     Printable reloading data.


The More You Order

The More You Save!

.30-40 Krag

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capacity  may vary 5-10% between brands.

Cartridge Type - ..30-40 Krag

Bullet Type - .22/sabot 

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 2.8

Case Length (IN) - 2.304

Full Case Capacity (GR WATER)  - 52.2

Bullet Length (IN) - .72

Barrel Length (IN) - 22

Bullet Seating Depth (IN) - .224

Displaced Water (GR) - 4.212

Effective Water Capacity of Case (GR) - 47.998

Effective Barrel Length (IN) - 19.92

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data - .30-40 Krag

Caliber - .308

Bullet Weight - 55 GR

Barrel Length - 19.92 in

Case Capacity - 63.283 GR of Water (CALC)

Bullet Diameter - .308

Sectional Density - .083

Volume Ratio - 8.7

Cartridge Temperature - 70 Degrees F.

Powder Class - FAST POWDERS

 Powder type - IMR-4198, RX7, S-4197 *Check Manual*

Charge/ Bullet Weight - 0.698

Calc. Powder Charge  - 38.4 GR

Load Den - 80%

Est. Muzzle Velocity - 3700 FT/SEC

Est. Peak Pressure - 38500 PSI

Powder Class - Alternate powder class not available.

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data - .30-40 Krag

Powder type - IMR-4198, RX7, S-4197 *Check Manual*

Load Density                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        36.0                             3500                    33800

       80                                        38.4                             3700                    38500

       85                                        40.8                             3900                    43500

       90                                        42.2                             4200                    48700*

       95                                        45.6                             4400                    54300*

     100                                        48.0                             4600                    60200*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved