Sabot Starter Kit

Sabot Starter Kit

Sabot Starter Kit
Click to enlarge image(s)
Kit includes 100 Sabots, The sabot seating die, and free reloading data.

Reloading data Included*

FREE SHIPPING

on All orders of
$50 or MORE 
.30-06

* Please keep in mind that the data is for reference only *

* Caution * case capacity calculations *

------------------------------------------------------------------------------------------------- 

Cartridge case capasity  may vary 5-10% between brands.

Cartridge Type - .30-06

Bullet Type - .22/sabot 

Bullet Weight - 55

Butllet Diameter (IN) - .308

Overall Cartridge Length (IN) - 2.9

Case Length (IN) - 2.484

Full Case Capacity (GR WATER)  - 69

Bullet Length (IN)  - .72

Barrel Length (IN) - 22

Bullet Seating Depth (IN) - .304

Displaced Water (GR) - 5.717

Effeective Water Capasity of Case (GR) - 63.283

Effective Barrel Length (IN) - 19.82

 

**1fd 1 Cartridge Load Development/** 4-26-93

--------------------------------------------------------------------------------------------------

Cartridge Data -.30-06

Caliber - .308 IN

Bullet Weight - 55 GR

Barrel Length - 19.82 in

Case Capasity - 63.283 GR of Water (CALC)

Bullet Dianeter - .308 in

Sectional Dencity - .083

Volume Ratio - 6.8

Cartridge Temperature - 70 Degrees F.

Powder Class - MEDIUM FAST POWDERS

 Powder type - IMR-3031, RX11, H355, AA2230, S3032, WW748

Charge/ Bullet Weight - 1.038

Calc. Powdrer Charge  - 67.1 GR

Load Den - 90.2%

Est. Muzzle Velocity - 4200 FT/SEC

Est. Peak Pressure - 44400 PSI

Powdwer Class - Alternate powder class not available

 

**For starting loads reduce Calc. powder charge by at least 10%**

**Alternate load information** 04-23-93                                                            

--------------------------------------------------------------------------------------------------- 

Cartridge Data -

Powder type - IMR-3031, RX11, H355, AA2230, S3032, WW748

Load Dencity                   Charge Weight                 Velocity               Pressure 

        %                                          GR                              FPS                       PSI       

       75                                        47.5                            3500                    30700       

       80                                        50.6                            3700                    34900

       85                                        53.8                            4000                    39400

       90                                        57.0                            4200                    44200*

       95                                        61.1                            4400                    49200*

     100                                        63.3                            4700                    54600*

* Warning - HIGH PRESSURE - REFERENCE ONLY ! 

 


 
 
    Sabotco, LLC 1357 S 1500 E, Provo, UT 84606   
     [Privacy Policy]
Sabot results, sabot pictures, and other information provided on this website are derived from the writings and test results of experienced reloaders. Sabots used for sabot slugs and sabot bullets are made from injection moulded polycarbonate plastic. The sabot slug offers a faster flatter trajectory than ammo fired without sabots.
 
Sabot Information Copyright © 2007. All rights reserved